Performance Air Intake for 2009 & 2010 Yukon, Sierra, Tahoe, Suburban, Silverado & Avalanche Models

Air Intake for GMC Yukon, GMC Sierra and Chevrolet Tahoe, Suburban, Silverado and Avalanche Dyno Chart for GMC, Yukon, Sierra, Chevrolet (Chevy) Tahoe, Suburban, Silverado, Avalanche

Pickup Trucks and Sport Utility Vehicles have become an important part of everyday living. From construction workers to soccer moms, only trucks and SUV’s have the size and power necessary to get the job done.

Chevy Silverado 1500 with K&N Air Intake System

The Yukon, Sierra, Tahoe, Suburban, Silverado, Avalanche have become popular choices among truck enthusiasts. Chevy and GMC engineer their trucks and SUV’s to withstand the toughest of tasks.

Power and performance is something you can never have enough of with a truck or SUV. K&N designed an air intake system (63-3070) for Select 2009 and 2010 GMC Yukon, Sierra models and select 2009 and 2010 Chevrolet Tahoe, Suburban, Silverado and Avalanche models. The 63-3070 was built to replace the restrictive factory airbox and intake housing with a custom molded intake tube that smoothes and straightens air flow to the engine. The 63-3070 uses a chrome topped K&N washable and reusable air filter (RF-1042) for increased air flow and outstanding engine protection.

K&N dyno testing showed an increase of 16.59 horsepower at 5342 rpm with use of this performance air intake. K&N air intake system 63-3070 comes with a custom heat shield to help direct cooler outside air into the engine for more power.

The 63-3070 comes with a million mile limited warranty and is guaranteed to add horsepower to your truck or SUV. Typical installation is done in 90 minutes or less. Concerned about the installation?  Take a look at K&N’s 63-3070 air intake installation video to see the step-by-step instructions of this install. Also check out the 63-3070 feature video that highlights the air intake’s benefits.

K&N performance intake system 63-3070 will fit the following vehicles:

2009 and 2010 GMC YUKON XL 2500 6.0L
2009 and 2010 GMC YUKON XL 1500 5.3L
2009 and 2010 GMC YUKON DENALI. 6.2L
2009 and 2010 GMC YUKON DENALI XL. 6.2L
2009 and 2010 GMC YUKON 5.3L
2009 and 2010 GMC YUKON 4.8L
2009 and 2010 GMC SIERRA DENALI 6.2L
2009 and 2010 GMC SIERRA 1500 6.0L
2009 and 2010 GMC SIERRA 1500 5.3L
2009 and 2010 GMC SIERRA 1500 4.8L
2009 and 2010 CHEVROLET TAHOE 6.2L
2009 and 2010 CHEVROLET TAHOE 5.3L
2009 and 2010 CHEVROLET TAHOE 4.8L
2009 and 2010 CHEVROLET SUBURBAN 2500 6.0L
2009 and 2010 CHEVROLET SUBURBAN 1500 5.3L
2009 and 2010 CHEVROLET SILVERADO 1500 6.2L
2009 and 2010 CHEVROLET SILVERADO 1500 6.0L
2009 and 2010 CHEVROLET SILVERADO 1500 5.3L
2009 and 2010 CHEVROLET SILVERADO 1500 4.8L
2009 and 2010 CHEVROLET AVALANCHE 6.0L
2009 and 2010 CHEVROLET AVALANCHE 5.3L
2009 and 2010 CADILLAC ESCALADE 6.2L

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

2007 to 2010 Toyota Tundra Finds 13 Extra HP With K&N Air Intake Performance Add-On

K&N Air Intake installed on a Toyota Tundra Dyno Chart for Toyota Tundra 5.7 Air Intake

2007, 2008, 2009 and 2010 Toyota Tundra’s are a real joy to drive. These full-size trucks were made for heavy tasks and can take the rigorous abuse of daily challenges. It’s 5.7L V8 engine gives an adequate amount of power and torque for most applications.

Air Intake System for 2007 to 2010 Toyota Tundra with 5.7L engine.

K&N has released an air intake system (63-9031-1) that gives these Toyota Tundra models the option of gaining even more horsepower and torque. This K&N air intake replaces the restrictive factory air box and air filter with a custom intake tube and high-flow air filter. The 63-9031-1 is equipped with a non-metallic intake tube that smoothes and straightens air-flow to dramatically reduce intake restriction.

K&N design takes advantage of the extra space under the Tundra’s hood by using a large chrome top air filter, part RF-1042. This K&N air filter is washable and reusable. The air filter and air intake are designed to last for the life of your Toyota Tundra.

The 63-9031-1 comes with a powder coated steel heat shield that isolates the filter from the rest of the engine compartment. This directs cooler air toward the air filter. Installation of the 63-9031-1 air intake system is made simple with K&N’s detailed instructions. This air intake system attaches using all existing mounting points and can be done in 90 minutes or less.

More power is always nice when passing, pulling loads or just getting up a steep incline. Dyno testing of the 63-9031-1 revealed a remarkable 13.05 horsepower gain at 5282 rpm. K&N air intake systems come with a million mile limited warranty and offer an economical performance add-on for your cherished Toyota Tundra.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

K&N Engineering, Inc. News
Toyota Tundra and Sequoia Gain More Than 13 Horsepower with K&N Performance Air Intake

Toyota Tundra with K&N air intake system

Dyno Chart for Toyota Tundra and Toyota Sequoia 5.7L

The Toyota Tundra is a full-size pickup truck that focuses on performance and handling ability. Although the Toyota Tundra was built with a strong V8 engine, many truck lovers find themselves looking for more power and torque. K&N has the answer for these power seekers in their new performance air intake system (77-9031-1KP) for 2007, 2008, 2009 and 2010 Toyota Tundras with 5.7 liter V8 engine and for 2008 Toyota Sequoia SUV’s with 5.7 liter engine.

Air Intake System for 2007 to 2010 Toyota Tundra 5.7L and 2008 Sequoia 5.7L

Toyota Tundra and Sequoia owners can release a 13.43 peak horsepower gain at 5142 RPM hidden behind their restrictive factory air intake and filter with K&N’s air intake. K&N completely replaces the stock intake system with a polished aluminum intake tube designed to smooth and straighten air flow. The 77-9031-1KP is equipped with a high-flow chrome top air filter (RF-1042) that is designed to capture harmful particles and will perform for up to 100,000 miles before service is required depending on driving conditions.

The 77-9031-1KP air intake system includes a custom heat shield that is designed to funnel cooler air toward the filter. K&N air intake systems can easily be installed using common hand tools in 90 minutes or less. K&N provides detailed instructions that guide you through the installation process making it simple to add power and torque to your Toyota Tundra or Sequoia.

K&N’s 77-9031-1KP air intake for the 2007 to 2010 Toyota Tundra and 2008 Toyota Sequoia 5.7L SUV, is backed by the famous K&N Million Mile Limited Warranty. K&N air intakes can be purchased at most auto parts and performance shops.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Add Power to 2010 Chevy Camaro SS with K&N Air Intake Kit

2010 Chevy Camaro SS with K&N Air Intake

Dyno Chart for 2010 Chevy Camaro SS

When it comes to classic American muscle cars, the Chevy Camaro is on top of many lists. Chevrolet introduced the Camaro in the early 1960’s to compete with the well-respected Ford Mustang. In 2002, Camaro sales were down and Chevrolet ceased its production. An all new Camaro has emerged for the 2010 model year bringing style and performance back to the table. Available only as a coupe, the 2010 Chevy Camaro SS is equipped with a powerful 6.2 liter V8 engine.

Air Intake System for 2010 Chevy Camaro SS 6.2L

For those looking for a performance boost, K&N has released an air intake system (63-3074) that is guaranteed to increase horsepower. The 63-3074 was engineered to the specific design of the Camaro’s engine compartment and uses only factory holes and mounting points. K&N made installation of this air intake simple by providing written instructions and a detailed installation video that takes you through the process step by step. Installation of the 63-3074 is usually done in 90 minutes or less and only requires common hand tools.

K&N’s air intake system 63-3074 uses a non-metallic intake tube and oversized high-flow air filter to replace the restrictive factory intake housing and air filter. A heat shield is standard with this air intake and is designed to allow cooler air to enter your engine.  Less restriction and cooler air means more power throughout the rpm range.  K&N dyno tested this intake and the results were outstanding.  After installation the K&N 63-3074 air intake produced an amazing 344.27 rear wheel horses at 5161 rpm on a 2010 Chevy Camaro SS. This was a net gain of 18.62 horsepower at 5161 rpm.

The 63-3074 comes with a large K&N air filter (RF-1042) that is washable and reusable. This high-flow air filter captures harmful particles and it will perform for up to 100,000 miles before service is required depending on driving conditions.  This K&N air intake system, like all other K&N air intakes, is backed by the famous K&N Million Mile Limited Warranty.  K&N air intakes can be purchased at most auto parts stores and performance shops.  Use the K&N dealer search to find a K&N dealer near you.  Find K&N products for any vehicle using the K&N application search on www.knfilters.com.

The Subaru Impreza WRX STi is known for its impressive performance, safety and comfort. It offers a wider rear track and an improved brake pedal feel. The new underbody also adds stability and higher speeds.

K&N’s 69-8005TTK air intake system for the 2008,2009 and 2010 Subaru Impreza WRX STi with a 2.5 liter engine

White Subaru Impreza WRX STi

K&N has developed a cold air intake system, part number 69-8005TTK for the 2008, 2009 and 2010 Subaru Impreza WRX STi with a 2.5 liter engine. K&N dynamometer testing shows a 17.52 horsepower gain at 5260 rpm.

K&N air intake system (with red finish) installed in 2008 Subaru WRX STi

Dyno chart for 2008 Subaru WRX STi with a 2.5 liter engine

The 69-8005TTK features an aluminum intake tube in powder coated black and a K&N carbon fiber top round tapered universal air filter, part number RP-5113. Our washable and reusable air filter is isolated by a heat shield to direct fresh air to the engine. This filter captures harmful particles, increases airflow and also increases filter service life compared to the OEM air filter. It will perform for up to 100,000 miles before service is required depending on driving conditions.

The impressive horsepower gain is also aided by the radius adaptor’s design as it smoothly takes the 5 inch flange of the air filter and connects it with the intake tube. The air intake tube has a CNC precision machined billet mass air adaptor.

The high-flow technology invented by K&N provides the best balance of airflow and filtration. Designed to be installed with simple hand tools in 90 minutes or less, our K&N air intake systems are backed by the K&N Million Mile Limited Warranty.

K&N Engineering, Inc. News
2010 Chevrolet Camaro Gets Extra 18 HP with Simple Performance Addition

The 2010 Chevrolet Camaro is legendary among enthusiasts and consumers. As one of America’s favorite muscle cars, it offers old school looks and new school performance. K&N’s air intake system offers even more power to your pony car that will match its bad boy looks.

K&N’s 69-4519TP air intake system for the 2010 Chevrolet Camaro with a 6.2 liter V8 engine

2010 Chevrolet Camaro

K&N performance air intake kit, part number 69-4519TP for the 2010 Chevrolet Camaro with a 6.2 liter V8 engine provides an incredible 18 horsepower increase at the rear wheels.

K&N air intake system installed in 2010 Chevrolet Camaro

Dyno chart for 2010 Chevrolet Camaro

K&N’s Research and Development Department tested a 2010 Chevrolet Camaro SS with a 6.2 liter V8 engine on one of our in house dynamometers. Results showed an increase across the RPM range with a peak horsepower gain of 18.12 horsepower at 5200 RPM.

In addition to power gains, K&N air intake systems are also designed to increase filtering capacity and improve throttle response. The heat shields are engineered to isolate the oversized K&N chrome top high flow air filter, part number RF-1042 from engine bay heat.

This air intake kit also makes use of the Camaro’s factory fresh air duct which provides cooler outside air to the K&N air filter. This filter captures harmful particles, increases airflow and also increases service life. It will perform for up to 100,000 miles before service is required depending on driving conditions.

The mass air sensor is installed in the 90 degree bright intake tube. The mass air sensor adaptors are precision CNC machined, 6061 billet aluminum for accurate mass air flow sensor readings.

It takes about 90 minutes to install the 69-4519TP. This K&N air intake system, like all other K&N air intake systems is backed by the famous K&N Million Mile Limited Warranty.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.