K&N's 69-2004TTK Performance Air Intake System for the 2007-2008 Mini Cooper S 1.6L Turbo

At first glance calling the 2007 Mini Cooper “All New” may seem like a ruse. Upon closer inspection the surprisingly significant changes make themselves better known. While European pedestrian impact standards dictated minor changes to exterior dimensions, the biggest surprise comes from under the hood. A lot of investment was made into new engines for the Mini Cooper. An all-new turbocharged 1.6-liter engine powers the Cooper S. The new turbocharged engine offers a nice bump in both horsepower and torque over the previous generation Cooper S. Nevertheless, K&N engineers took one look at the car and decided that more could be done.

That’s exactly what K&N did with Performance Air Intake System 69-2004TTK. Great consideration was put into the design of part number 69-2004TTK. Exclusive features include a stepped intake tube to eliminate the need for special adapters while improving air delivery. The location of the step was carefully tuned to provide greater increases in power. Additionally, a special angled silicone adapter was created to maintain the factory location of the stock crankcase vent hose. 69-2004TTK incorporates a highly unique heat shield that bolts to the bottom half of the factory air box. This retains the original cold air induction keeping inlet air temperature within factory specifications. The result of this hard work and dedication is an extra 11 horsepower at the wheels for the 2007 to 2008 Mini Cooper S. Read More→

The Mitsubishi Raider has aggressive styling and is the brand’s only pickup truck. However, under the Raider’s eye-catching fenders is essentially a midsize Dodge Dakota pickup. Both have good towing capacity and handle well on the road.

K&N's 77-1558KP air intake system for 2008, 2007 Mitsubishi Raider with a 3.7 liter engine and 2008, 2007 Dodge Dakota with a 3.7 liter engine

K&N has designed a new polished aluminum high flow air intake system (77-1558KP) for the 3.7 liter engines of the 2008 Dodge Dakota, the 2007 Dodge Dakota, the 2008 Mitsubishi Raider, and the 2007 Mitsubishi Raider.

Dynamometer tests show a 6.14 horsepower gain at 4200 RPM. K&N’s air intake design has lower restriction than the factory air box system. K&N removed the intake plenum to help smooth the air entering the throttle body.

The 77-1558KP uses a conical shaped chrome top high flow air filter (RF-1048), and a powder coated heat shield in place of the vehicle’s stock airbox. The extra large heat shield directs incoming fresh air from the factory air inlet into the air filter, isolates the K&N air filter from the engine compartment and allows it to receive a consistent flow of fresh air.

K&N's 69-7062 cold air intake system for the 2007, 2008 and 2009 Nissan Altima with a 3.5 liter V6 engine

K&N has designed an air intake system 69-7062TTK in black for the 2007, 2008 and 2009 Nissan Altima 3.5 liter V6 engine. K&N dynamometer tests show a 9.36 horsepower gain at 4300 RPM for this air intake kit.

K&N air intake systems are designed to reduce intake restriction and at the same time, smooth and straighten airflow while providing excellent filtration

The K&N round tapered universal air filter RU-4990 is protected by a heat shield which comes with edge trim. The heat shield aids the K&N washable and reusable universal air filter in receiving a consistent flow of fresh air.

K&N’s air intake design works with factory computer settings. Simply remove the factory air box assembly and replace it with the 69-7062TTK. The mass air sensor adaptor is precision CNC machined for accurate mass air flow sensor readings.

With a K&N performance air intake system, drivers can count on extra horsepower whether driving around town, commuting or taking the family out. In fact K&N guarantees more horsepower!

K&N air intake system 69-7062TTK installed in 2007 Nissan Altima

It takes about 90 minutes to install this air intake and it is covered by K&N’s Million Mile Limited Warranty.

K&N Engineering's 63-3069 air intake system

K&N has designed an air intake system (63-3069) for the 2008 and 2009 Chevrolet HHR with a 2.0 liter engine for owners who want

more power out of their HHRs.

K&N dynamometer tests show a 9.37 increase in horsepower at 5069 RPM with the K&N 63-3069 air intake system installed.

This K&N air intake system uses the OE air box while incorporating a specialized air box lid.  The lid design adds more space to ensure the large K&N washable and reusable lifetime air filter (E-1989) fits inside the airbox and has room to provide a constant flow of fresh air.

This K&N air intake system is designed to increase horsepower while offering outstanding engine protection. It can easily be installed on your vehicle in 90 minutes or less and is backed by K&N’s Original Million Mile Warranty.

K&N 63-3069 installed

K&N 69-1211ttk

For 2008 Honda Accord owners that want more power K&N has designed a new air intake system (69-1211TTK) in black for the 2008 Honda Accord 2.4L engine. K&N dynamometer tests show an 11.13 horsepower increase at 5600 RPM with the K&N air intake system installed. K&N tests multiple vehicles on each air intake kit released to ensure that consistent horsepower and torque gains are produced.

The 69-1211TTK contains a mount for your vehicle’s mass air sensor. Remove the mass air sensor from your vehicle’s stock air box and install it into K&N’s non restrictive mandrel bent aluminum intake tube using the provided K&N hardware. Read More→

Stock Car racing fans are familiar with Ford’s current contender on the oval track. While the Fusion that rolls off the assembly line probably won’t find it’s way on to the track, its racing pedigree can’t be denied. Born for the oval track, but built for the street, Ford Fusion owners can awaken their car’s passion for competition with K&N’s Performance Air Intake System (69-3515TS) for the 3.0L V6 Models.

With the addition of K&N’s new Performance Air Intake System, part number 69-3515TS, Fusion owners can realize a gain of nearly 12 horsepower at the wheels. K&N’s Research and Development Department tested a 2006 Ford Fusion 3.0L V6 on our in-house dynamometer. Results showed an increase of 11.9 horsepower @ 5001 RPM. 69-3515TS provides increased performance while intensifying under-hood appeal with an attractive Silver Powder Coated Aluminum Intake Tube.

K&N has developed a high flow custom air filter kit product number RK-3931 for 2008 -2009 Harley Davidson Dyna FXD motorcycles. The oversized custom air intake assembly was developed around an original K&N high flow air filter and will fit neatly behind your Harley’s air filter cover. The K&N air filter is washable, reusable, pre-oiled and ready to ride. See the complete list of motorcycles below.

The RK-3931 is designed to get more horsepower from your Harley-Davidson engine, in fact K&N dyno testing shows a 6.54 horsepower increase @ 5100 RPM on a 2008 Harley Davidson Dyna Street Bob.

The cast aluminum back plate includes built-in internal breathers. Also, a bolted-in dyno tuned velocity stack decreases the restriction of air into the throttle body. The result is more power you can feel with outstanding engine protection.

Spacers and hardware are included to mount your stock Harley Davidson air cleaner cover and a bump-seal is used at the base to provide a perfect seal. Installation can be performed in 90 minutes or less.

Not since 1973 has Porsche’s legendary RS name plate been available in the U.S. market. In 2007 the 911 GT3 RS hit American soil once again, creating much excitement among racing enthusiasts. The 911 GT3 RS has been described as a street-legal racecar intended as a homologation model for a range of racing series. Wearing a celebrated name like Porsche means the 2007 GT3 RS won’t disappoint and neither will K&N’s Performance Air Intake System, part number 63-7001.

K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten airflow. This allows your vehicle’s engine to use a larger volume of air than the OEM air filter assembly. More air means more power and torque when you need it. With a K&N Performance Air Intake System, consumers can count on extra horsepower whether driving down the Las Vegas strip, or twisting through the famous “Corkscrew” at Laguna Seca.

The 2007 GT3 incorporates ultra lightweight materials throughout. Keeping with the carbon fiber theme, the 63-7001 air intake system uses a conical shaped, carbon fiber top, high-flow air filter (RP-5167) and powder coated two-piece aluminum heat shield in place of the vehicle’s stock air box. The result is an air filter that captures harmful particles, flows more air, and increases service life. This K&N air filter performs for up to 100,000 miles before service is required depending on driving conditions. Improving the air path between the filter and the engine is the rotationally molded high-density polyethylene tube. It offers the most flexibility in design and outstanding horsepower numbers. 63-7001 takes about 90 minutes or less to install, with no cutting or drilling, and is covered by K&N’s Million Mile Limited Warranty™

For increased protection and style, K&N includes Drycharger® filter wrap part number RF-1037DK with this air intake. Drycharger® filter wraps are made from a durable polyester material containing uniform micron openings which will stop small dirt particles and repel water; yet add little restriction to the airflow of your filter.