If you're new here, you may want to subscribe to my RSS feed. Thanks for visiting!
Thank you for visiting our Blog for Cold Air Intake Systems from AEM, Airraid, K&N and Injen. There will be ongoing information on the latest releases from these companies. Comments are welcomed and posts are listed as new products become available.
The Nissan Cube was a step in a new direction for compact four-door station wagons. This block-shaped hatchback brings a unique style to the wagon segment that has never been seen before. The Nissan Cube is offered in several trim levels and provides plenty of headroom and legroom for all occupants.
The Nissan Cube is a fun and comfortable ride but can use more power on the road. K&N saw this need for more horsepower and designed the 69-7077TTK cold air intake system. The 69-7077TTK was designed for the 2009 and 2010 Nissan Cube equipped with the 1.8 liter engine. K&N guarantees your Nissan Cube will increase horsepower with this simple performance modification. The 69-7077TTK completely replaces the factory air filter and intake housing with a textured black aluminum induction tube and K&N high-flow performance air filter (RC-9350). The 69-7077TTK is designed to last the life of your Nissan Cube and backed by K&N’s million mile limited warranty. In-house dyno testing shows the 69-7077TTK delivering 7.78 horsepower at 4886 rpm. 2009 and 2010 Nissan Cube owners can easily boost their horsepower with K&N’s cold air intake system. Installation of this system is usually done in 90 minutes or less. Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world. |
|
|
2010 Mazda Mazdaspeed3 2.3L Air Intake System Releases 24 Extra Horsepower |
There are lots of good things to say about the all new 2010 Mazda Mazdaspeed 3 with 2.3L engine. This second-generation Mazdaspeed3 seems to be popping up all over. The 2010 Mazda Mazdaspeed3 is a high-performance 4-door hatchback equipped with a turbocharged 2.3 liter four-cylinder engine. It is comes with a six-speed manual transmission and a sport-tuned suspension system. The Mazda Mazdaspeed3 combines high performance, great handling and quality interior to achieve a practical, yet sporty, sedan that is perfect for the daily driver.
K&N has embraced the turbocharged 2.3 liter engine of the Mazda Mazdaspeed3 by designing a performance air intake system (69-6012TS) that unleashes a power gain of up to 24 horsepower at 5000 rpm. The 69-6012TS air intake replaces the factory air box housing with a mandrel-bent aluminum intake tube and a K&N high-flow air filter. The purpose of the custom intake tube is to smooth and straighten air flow as it enters the engine. This intake system has a large K&N high-flow air filter that is washable, reusable and flows more air than the OE air filter while maintaining filtration levels critical to long engine life. The 69-6012TS cold air intake system for the Mazda Mazdaspeed3 comes with a Million Mile Limited Warranty and is guaranteed to increase horsepower. Installation of the 69-6012TS is simple. K&N provides detailed instructions that guide you through the process. A typical install takes less than 90 minutes and only requires common hand tools. Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world. |
|
2009 & 2010 Dodge Ram Hemi Gains 15 Horsepower with K&N Air Intake System |
The 2009 and 2010 Dodge Ram 5.7L Hemi V8 engine boasts more horsepower and a refined ride over the previous generation Ram Pickup.
 K&N Performance Air Intake System for the 2009 and 2010 Dodge Ram with a 5.7L Hemi V8 engine. |
2009 saw the introduction of a new rear suspension for the Ram that greatly improved ride quality and comfort. Additionally, the 5.7L Hemi V8 engine underwent several refinements boosting power while also increasing fuel economy.
While the new Ram is great right off of the assembly line, engineers at K&N have a knack for spotting potential for further improvement. K&N seized the opportunity to build one of their Performance Air Intake Systems (63-1561) for the 2009-2010 Ram 5.7L Hemi V8 models.
 K&N Performance Air Intake installed on Dodge Ram 5.7 liter HEMI engine. |
K&N’s Research and Development Department tested a 2009 Dodge Ram 5.7L Hemi V8 on their in-house dynamometer. With the addition of K&N’s new Performance Air Intake System (63-1561), Ram owners can realize an incredible gain of 15.66 more horsepower and 17.54 ft-lbs of torque @ 4688 RPM.
K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten airflow. This allows your engine to pull in air with ease compared to the OEM air filter assembly. More air means more power and torque when you need it. With a K&N Performance Air Intake System, consumers can count on extra horsepower whether towing, off-roading, or hauling six passengers plus gear to a job site.
This air intake system uses a conical shaped chrome top high-flow air filter (RF-1044) and powder coated aluminum heat shield in place of the vehicle’s stock air box. The result is an air filter that captures harmful particles, provides more surface area, and flows more air for extra power. This K&N air filter performs for up to 100,000 miles before service is required under normal highway driving conditions. Improving the air path between the filter and the motor is the rotationally molded high-density polyethylene tube. It offers a great deal of flexibility in design and outstanding horsepower numbers. It takes about 90 minutes or less to install this system with simple tools and it is covered by the K&N Million Mile Limited Warranty®.
For increased protection and style, K&N offers Drycharger® filter wraps that can be used in conjunction with part number 63-1561. Drychargers® are made from a durable polyester material containing uniform micron openings which will stop small dirt particles and repel water; yet add little restriction to the airflow of the air filter. Available in a variety of colors, K&N Drychargers® can be color coordinated with a vehicle’s finish.
Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.
|
Performance Air Intake for 2009 & 2010 Yukon, Sierra, Tahoe, Suburban, Silverado & Avalanche Models |
 Air Intake for GMC Yukon, GMC Sierra and Chevrolet Tahoe, Suburban, Silverado and Avalanche |
Pickup Trucks and Sport Utility Vehicles have become an important part of everyday living. From construction workers to soccer moms, only trucks and SUV’s have the size and power necessary to get the job done.
 Chevy Silverado 1500 with K&N Air Intake System |
The Yukon, Sierra, Tahoe, Suburban, Silverado, Avalanche have become popular choices among truck enthusiasts. Chevy and GMC engineer their trucks and SUV’s to withstand the toughest of tasks.
Power and performance is something you can never have enough of with a truck or SUV. K&N designed an air intake system (63-3070) for Select 2009 and 2010 GMC Yukon, Sierra models and select 2009 and 2010 Chevrolet Tahoe, Suburban, Silverado and Avalanche models. The 63-3070 was built to replace the restrictive factory airbox and intake housing with a custom molded intake tube that smoothes and straightens air flow to the engine. The 63-3070 uses a chrome topped K&N washable and reusable air filter (RF-1042) for increased air flow and outstanding engine protection.
K&N dyno testing showed an increase of 16.59 horsepower at 5342 rpm with use of this performance air intake. K&N air intake system 63-3070 comes with a custom heat shield to help direct cooler outside air into the engine for more power.
The 63-3070 comes with a million mile limited warranty and is guaranteed to add horsepower to your truck or SUV. Typical installation is done in 90 minutes or less. Concerned about the installation? Take a look at K&N’s 63-3070 air intake installation video to see the step-by-step instructions of this install. Also check out the 63-3070 feature video that highlights the air intake’s benefits.
K&N performance intake system 63-3070 will fit the following vehicles:
2009 and 2010 GMC YUKON XL 2500 6.0L
2009 and 2010 GMC YUKON XL 1500 5.3L
2009 and 2010 GMC YUKON DENALI. 6.2L
2009 and 2010 GMC YUKON DENALI XL. 6.2L
2009 and 2010 GMC YUKON 5.3L
2009 and 2010 GMC YUKON 4.8L
2009 and 2010 GMC SIERRA DENALI 6.2L
2009 and 2010 GMC SIERRA 1500 6.0L
2009 and 2010 GMC SIERRA 1500 5.3L
2009 and 2010 GMC SIERRA 1500 4.8L
2009 and 2010 CHEVROLET TAHOE 6.2L
2009 and 2010 CHEVROLET TAHOE 5.3L
2009 and 2010 CHEVROLET TAHOE 4.8L
2009 and 2010 CHEVROLET SUBURBAN 2500 6.0L
2009 and 2010 CHEVROLET SUBURBAN 1500 5.3L
2009 and 2010 CHEVROLET SILVERADO 1500 6.2L
2009 and 2010 CHEVROLET SILVERADO 1500 6.0L
2009 and 2010 CHEVROLET SILVERADO 1500 5.3L
2009 and 2010 CHEVROLET SILVERADO 1500 4.8L
2009 and 2010 CHEVROLET AVALANCHE 6.0L
2009 and 2010 CHEVROLET AVALANCHE 5.3L
2009 and 2010 CADILLAC ESCALADE 6.2L
Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.
|
2007 to 2010 Toyota Tundra Finds 13 Extra HP With K&N Air Intake Performance Add-On |
 K&N Air Intake installed on a Toyota Tundra |
2007, 2008, 2009 and 2010 Toyota Tundra’s are a real joy to drive. These full-size trucks were made for heavy tasks and can take the rigorous abuse of daily challenges. It’s 5.7L V8 engine gives an adequate amount of power and torque for most applications.
 Air Intake System for 2007 to 2010 Toyota Tundra with 5.7L engine. |
K&N has released an air intake system (63-9031-1) that gives these Toyota Tundra models the option of gaining even more horsepower and torque. This K&N air intake replaces the restrictive factory air box and air filter with a custom intake tube and high-flow air filter. The 63-9031-1 is equipped with a non-metallic intake tube that smoothes and straightens air-flow to dramatically reduce intake restriction.
K&N design takes advantage of the extra space under the Tundra’s hood by using a large chrome top air filter, part RF-1042. This K&N air filter is washable and reusable. The air filter and air intake are designed to last for the life of your Toyota Tundra.
The 63-9031-1 comes with a powder coated steel heat shield that isolates the filter from the rest of the engine compartment. This directs cooler air toward the air filter. Installation of the 63-9031-1 air intake system is made simple with K&N’s detailed instructions. This air intake system attaches using all existing mounting points and can be done in 90 minutes or less.
More power is always nice when passing, pulling loads or just getting up a steep incline. Dyno testing of the 63-9031-1 revealed a remarkable 13.05 horsepower gain at 5282 rpm. K&N air intake systems come with a million mile limited warranty and offer an economical performance add-on for your cherished Toyota Tundra.
Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.
K&N Engineering, Inc. News
Toyota Tundra and Sequoia Gain More Than 13 Horsepower with K&N Performance Air Intake
Dyno Chart for Toyota Tundra and Toyota Sequoia 5.7L
The Toyota Tundra is a full-size pickup truck that focuses on performance and handling ability. Although the Toyota Tundra was built with a strong V8 engine, many truck lovers find themselves looking for more power and torque. K&N has the answer for these power seekers in their new performance air intake system (77-9031-1KP) for 2007, 2008, 2009 and 2010 Toyota Tundras with 5.7 liter V8 engine and for 2008 Toyota Sequoia SUV’s with 5.7 liter engine.
Toyota Tundra and Sequoia owners can release a 13.43 peak horsepower gain at 5142 RPM hidden behind their restrictive factory air intake and filter with K&N’s air intake. K&N completely replaces the stock intake system with a polished aluminum intake tube designed to smooth and straighten air flow. The 77-9031-1KP is equipped with a high-flow chrome top air filter (RF-1042) that is designed to capture harmful particles and will perform for up to 100,000 miles before service is required depending on driving conditions.
The 77-9031-1KP air intake system includes a custom heat shield that is designed to funnel cooler air toward the filter. K&N air intake systems can easily be installed using common hand tools in 90 minutes or less. K&N provides detailed instructions that guide you through the installation process making it simple to add power and torque to your Toyota Tundra or Sequoia.
K&N’s 77-9031-1KP air intake for the 2007 to 2010 Toyota Tundra and 2008 Toyota Sequoia 5.7L SUV, is backed by the famous K&N Million Mile Limited Warranty. K&N air intakes can be purchased at most auto parts and performance shops.
Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.
The 2008 Dodge Viper defines brute power. Equipped with an 8.4-liter, 10-cylinder engine, the 2008 Dodge Viper is capable of producing over 600 horsepower. The Viper is often considered primitive when compared to ultra-luxurious supercars from Europe. However, what the Viper lacks in plush trim and options, it makes up for with its track credentials.
K&N’s Performance Air Intake System, number 69-2527TTK, for the 2008 Dodge Viper 8.4-liter V10
69-2527TTR installed on 2008 Dodge Viper 8.4-liter V10
69-2527TTR gained 18.69 horsepower for the 2008 Viper
The 2008 Viper is reported to accelerate from 0-60 mph in 3.7 seconds, cover the quarter mile in 11.8 seconds, and reach top speeds of around 200 mph. Combine that level of sheer power with the ability to precisely maneuver through turns, stop from 60-0 mph in around 100 feet, and the 2008 Viper will leave a venomous taste in mouths of European supercar owners.
K&N engineers are always hunting for more power. After looking under the 2008 Viper’s hood, K&N engineers knew the Viper was capable of more. Much consideration was put into the design of part number 69-2527TTR.
The stock 2008 Viper intake tract uses a dual throttle body set up fed by a common plenum with a single air filter. K&N intake 69-2527TTR replaces the stock pieces with twin powder coated mandrel-bent aluminum intake tubes and dual K&N high-flow air filters for improved air delivery.
This performance air intake system incorporates a unique heat shield, and the dual air filters line up with the factory fresh air intake on the hood. The result of this hard work and enthusiasm for performance is a nearly 19 horsepower gain at the wheels.
K&N’s Research and Development Department tested a 2008 Dodge Viper 8.4-liter V10 on our in-house dynamometer. Results showed horsepower increases throughout the RPM range with a shocking peak horsepower gain of 18.69 horsepower @ 5,300 RPM! 69-2527TTR provides improved performance with attractive red powder coated aluminum intake tubes to match the 2008 Viper’s valve covers.
Loading ...
